Eaton Environmental Monitoring Probe Gen 2EMPDT1H1C2
Environmental Monitoring of UPS & ePDUs (temperature / humidity).Call our sales team for pricing on 0333 222 4000
The Eaton Environmental Monitoring Probe Gen 2 is a second-generation environmental monitoring probe for the Eaton Gigabit Network Card and Eaton rack PDUs including G3 (firmware 4.x or later), G3HD and G3+. The new EMP maintains all the functionality of the previous generation of sensors (temperature, humidity and dry-contact monitoring) while adding the ability to be daisy-chained (up to 3 per host), allowing multiple sensors to connect to a single host.
For optimum air intake measurement within an enclosure, the EMP Gen 2 provides tie wrap mounting options for front and rear door perforation to specifically measure air flow at the intake point. This enhances the richness of rack-level environmental data for the top, middle and bottom of the rack.
Each Eaton EMP Gen 2 sensors can support up to two additional input contact sensor devices per module, for a total of six additional sensors per rack. Stay informed and reduce risk in your application by receiving environmental notifications and automating action through the Eaton Intelligence Platform for power management software. Additional sensors are sold separately.
• Measure ambient temperature and humidity at the rack level
• Monitor the status of up to six additional contact devices/sensors
• Display real-time and historical status of all sensors via the intranet or Internet
• Stay informed of alarms via email notification
• Act before problems affect sensitive equipment
• Aggregate real-time information via EMP Gen 2 sensor
Install and activate quickly
The Eaton EMP Gen 2 sensor easily mounts within an enclosure via the four available mounting options. Nylon fasteners, tie wraps, magnets and keyhole/screw mounting options provide the versatility required to mount the sensor within any application. Once mounted, simply connect directly to your rack PDU or UPS network card and begin setting up your notification parameters.
|Ports and connections
|Compatible with Network-M2 and Eaton rack PDUs including G3 (firmware 4.x or later), G3HD and G3+
|Dimensions and weight